review

Sensport Rave Model 1 Bluetooth Speaker With Carabiner

Monday, September 03, 2018

A sure way to ruin a speaker is by getting it wet or dropping it on the floor! Luckily, there is a way to future-proof yourself against damaging a speaker by getting a waterproof, shockproof speaker like the Move Mini or the Sensport Rave Model 1!
The Sensport Rave Model 1 has an IPX7 rating which makes the speaker both water resistant and waterproof up to 1 meter submerged under water for 30 minutes. You can have the Sensport Rave Model 1 bluetooth speaker playing inside a shower cubicle while taking a shower or have it playing at the beach or swimming pool.
Speaking of beach, the Sensport Rave Model 1 bluetooth speaker is also shockproof and dustproof so fine particles won't get into the speaker.
The Sensport Rave Model 1 is a powerful bluetooth 4.2 speaker with 10-meter long wireless coverage, passive subwoofer and twin speaker drivers (8W each) that deliver a total of 18W of power thanks also to very low impedance (4 ohms) resistance.
The sound delivery of the Sensport Rave Model 1 speaker is big, clear and bassy via 45mm speaker drivers which really drive the sound superbly.
The treble range is wider than the bass (80Hz-20kHz) so the speaker favors treble frequencies over bass frequencies. With that said, the overall audio quality is balanced and pretty impressive too, considering the size of the Sensport Rave Model 1 speaker (16.5cm long,7.8cm wide and 4.3 high).
The Sensport Rave Model 1 speaker only weighs 350 grams so you can easily pick it up with one hand, take it with you and clip it anywhere thanks to the aluminum carabiner (it can be removed too).
The Sensport Rave Model 1 doesn't require batteries thanks to a rechargeable 3600mAh battery built-into the speaker. The battery charges via a maximum of 5V 1A input power so charging time is 4.5 hours to fully charge the battery.
Battery life is fairly long (15+ hours) when playing music at 50% volume but decreases down to 6 hours when playing music at 100% volume.
Sensport Rave Model 1 speaker incorporates an auxiliary socket so you can play audio from non-Bluetooth devices via the included 3.5mm audio cable. Having an auxiliary in is great because you can plug your phone in when not using the speaker wirelessly via bluetooth. 
There is also a card reader slot to listen to music without a phone or tablet. The memory card slot support micro SD cards up to 32GB size.
The micro USB port you see next to the auxiliary-in is the charging port. A micro USB charging cable is also supplied with the Sensport Rave Model 1.
When connected to your smartphone, the Sensport Rave Model 1 acts as a powerful handsfree speakerphone which comes in handy for conference calls so several people can talk at the same time.
accessories

Similar Gadget Explained Reviews

0 comments

Connect With Gadget Explained